Construction and Infrastructure Profiles
The Grating M-Profile Roll Forming Line is a compact roll forming line that produces, from coil, the M profile used to make drainage channel gratings. It consists of a mechanical decoiler, a roll forming machine, a Turk’s head and a flying shear.
Product Features
The strip from the mechanical decoiler is fed into the roll forming machine under sensor control and enters the machine straight through the entry group. The formed profile is straightened by the Turk’s head and reaches the flying shear; parts are cut to length by the flying shear, which returns to its start position after each cut. The M profiles produced are cut into pieces and welded onto a frame to form the channel grating.
Line Components
- Mechanical decoiler
- Roll forming machine (6 stations, compact shaft-and-roll type)
- Turk’s head
- Flying shear
Technical Data
| Roll forming type | Compact, special type, shaft-and-roll |
|---|---|
| Feeding | From coil |
| Number of stations | 6 |
| Roll tooling set | 1 set |
| Production capacity | 15 m/min |
| Sheet thickness | Up to 1.5 mm |
| Strip width | 60 mm |
| Drive system | Single motor drive |
| Sample profile dimensions | 15.5 × 16.75 mm, 1.5 mm sheet |
Applications
Frequently Asked Questions
Where is the M profile used?
It is used in construction to make channel gratings; the profiles are cut and welded onto a frame.
Does the line run from coil?
Yes. The strip is fed from coil on the mechanical decoiler and cut to length by the flying shear.
Catalogue
Catalogue (EN, PDF) Katalog (TR, PDF) Каталог (RU, PDF)
Get a quote for your project
Tell us the product you want to make, the material and the capacity you need, and we will come back to you with a suitable solution.
